High Frequency Common Mode Choke For SMT Data Line EMI Filters

SMT Data Line EMI Filters , common mode choke

Data line common mode chokes provide general purpose EMI filtering from lower-speed data rates to ultra-high speeds such as USB3.x, HDMI2.0, and IEEE 1394. Eliminate CM noise in CAN, CAN FD, and FlexRay automotive bus systems.

Feature

• Exceptional common mode noise attenuation from 15 MHz to 300 MHz; passes signal line data below 300 MHz with minimal attenuation
• DC current capacity of 500 or 100 mA.
• Excellent electrical isolation – 300 Vrms for 1 minute
• Core material Ferrite
• Ambient temperature –40°C to +85°C
• Storage temperature Component: –40°C to +85°C.
• Tape and reel packaging: –40°C to +80°C
• Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
• Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)
• Packaging 1000/13″ reel Plastic tape: 16 mm wide, 0.46 mm thick, 12 mm pocket spacing, 4.5 mm pocket depth

EMI Filters Common Mode Choke

SMT Data Line EMI Choke Coil

High Frequency Common Mode Choke

High Frequency Common Mode Choke For SMT Data Line EMI Filters Images